Network Design Consultation
Design recommended for the client
The requirement of the client of the small billing business shall deserve a tailored system for his network design. This compels for network similar for a small office management process. Shall has a variety of the components suited in their places. The network shall facilitate the process of file sharing, internet access, connection to a networked printer, maintain a basic, secure environment and facilitate a multiple email addresses. The application of the client/server system shall prove vital for the entire process of the design work considering the laid requirement by the clients. The client specifies that the numbers of the user are three. This leads to the categorization as the multiple user networks (Kennington, 2011).
The design focuses majorly on the speed of the hard disk, the quality on the networks and the vital feature of the workstation to enable smooth operation. The access point shall connect the laptops from the center of the network. This shall facilitate the configuration of the peripheral of the system at their different points. However, connection of the printer shall emerge from one of the laptops. Noting that the workstations shall far apart dependable and secured wireless system shall be viable for the project.
Star topology shall have the best applications due to the nature of the user system. This is due to the centralization of the hub of the network at the center. This acts ah the concentrator of the network. From the point, the supervision management and control of the operations of the system shall have effect as compared to the other systems. For the check on the viability in terms of the cost effectiveness of the project, coaxial cables may gain use. The star system avails several advantages to the client (Kennington, 2011). This includes the ease of installation and wiring as may be suitable. In the process of removal of the other devices, few cases of disconnections emerge. It shall facilitate the detection of the faults in the process of removed parts.
However, the topology may exhibit several demerits for the network design. These are eminent in the quantity of the cables applied if need be. However, the system shall fully rely on the wireless feature for the process of operation and not the Ethernet that may demand the use of the cables. The network shall invest on the 802.11b that is similar to unregulated radio signal frequency to operate. This frequency is much dependable in the transfer of folders and files for as required by the client. The frequency has economical basis since it is cheap. However, they have characteristic interferences features in cases on of influence from the microwave ovens, phones without cords and other electrical signal producing appliances (Kennington, 2011). They possess a frequency of approximately 2.4 GHz range. Proper consideration shall ensue to facilitate avoidance of the interference features. This includes the isolation of the device from the appliances.
Diagram of the configuration
Workstation 1
Printer
User 1
File server
Workstation 2
Hub
User 2
User 3
The three user computers connect to the hub of the system. The two workstations shall use one printer at the various times.
The length of the distance apart of the workstations shall not bear much significance noting that the system makes massive use of the wireless connection for the components. The star connection shall facilitate the advancement in the growth of the network as may be deemed vital. This is achievable in the addition of the concentrator to the network. The consideration for the money factor for the system is vital especially considering that the system has l linear bus network has low financial implications.
Network architecture entails the designing of the appropriate communication network. It normally encompasses the framework for the specification of the existing network's physical apparatus accompanied by their specific functional organization. Moreover, it also entails the configuration, the outfitted, principles and procedures, and the corresponding data formats utilized. The prevailing Open Systems International model has segregated the existing communications systems into minor sections known as layers. Network architecture normally possess physical layer, data linking layer, network layer, Transport Layer, The Session Layer, Presentation Layer and application layer (Halabi & McPherson, 2000).
Physical layer normally defined the prevailing electrical accompaniment of fundamental devices physical specifications. It entails the outline of the pins, voltages, hubs, cable specifications, repeaters, host bus adapters and the network adapters. It diffuses the existing stream of the bits above a communication channel. Data Link layer within the network architecture offers the efficient and technical ways of transferring data amidst the network entities. It also identifies and corrects the prevailing error that occurs within the physical layer. The prevailing Local area network architecture entails the broadcast- capable of performing the multi- access media (Halabi & McPherson, 2000).
Suggested network architecture and Internet access configuration
Network layer
It makes available the procedural and functional means for variable length data sequence transfer. This is from one network source host to a different designated destination network host. This happens with maintenance of service quality as per Transport Layer request. It is capable of conducting the functions of network routing and capable of handling reassembly and fragmentation, and errors in report delivery. Routers at this layer execute a logical addressing scheme that is not hierarchical (Halabi & McPherson, 2000). It majors in subnet operation control and determines strategies in routing between IMP.
Transport layer
It...
Management Consultation: Improving Financial Performance The scenario presented by the prompt here concerns a company that we will refer to as a Silly Putty, Inc. Charged with the responsibility of producing industrial-sized barrels of Silly Putty for distribution to packaging plants on a multinational level, the company finds itself at a cross-roads. As a managing consultant, I have been brought on board to help the company navigate the most difficult point
Stated to be barriers in the current environment and responsible for the reporting that is inadequate in relation to medical errors are: Lack of a common understanding about errors among health care professionals Physicians generally think of errors as individual that resulted from patient morbidity or mortality. Physicians report errors in medical records that have in turn been ignored by researchers. Interestingly errors in medication occur in almost 1 of every 5 doses
It is not known what cost FedEx will have to pay for a durable but reliable smartphone. Most such devices are not designed with longevity in mind, and FedEx normally utilizes devices with long lives. FedEx would be equipping upwards of 200,000 workers, so even negotiating a deal to pay $200 per unit would cost the company $40 million. In all likelihood, however, the cost will be much higher,
HSMS Gap Analysis and Hazard Identification Risk Assessments Description of APM Terminals Legal Environment Review of the Health and Safety Management System Description Gap Analysis Hazard Identification Physical Hazards Health and Welfare Hazards Risk Assessment Physical Hazard -- Working at Height - Scaffolding Health & Welfare Hazard -- Noise Action Plans Action Plan 1 - Management System Action Plan 2 -- Hazards and Risks Barbour Checklist: BS OHSAS 18001 Audit Checklist Occupational health and safety management has numerous benefits for business, not only an employer's duty
This is particularly the case in sub-Saharan Africa where clinicians have often come to rely on signs and symptoms alone to make diagnoses." (Nicoll, Walraven, Kigadye, Klokke, 1995) The laboratory environment is critical to administering testing to determine population rates of HIV / AIDS throughout nations and perhaps continents where the lacking of resources facilitates a substandard environment for care. In the case of the African nation of Mozambique, which
Telemedicine: Will telemedicine improve the quality of healthcare and its delivery for remotely located advanced healthcare para-professionals? The basic purpose of this study is to discuss whether telemedicine will improve the quality of health care and it's delivery for remotely located advanced health care para-professionals. The scope of the study is over seeing as it covers the implication of implementation of telemedicine as a professional genre. It would also show how the
Our semester plans gives you unlimited, unrestricted access to our entire library of resources —writing tools, guides, example essays, tutorials, class notes, and more.
Get Started Now