Often humans take much longer to detect fire particularly if they are not close to site for example at night. In such cases, the automatic detection of fire and smoke helps a lot. The explosion suppression system and water spray systems are used to minimize the damages of explosion and fire by detecting fire in not time. These systems are very effective and detect fire in milli-seconds and also respond with less than a second time. The protection systems offered by explosion suppression and water sprays are comparable and organizations are suggested to use one of these on the basis of cost and suitability to their infrastructure. The explosion suppression is mostly used in extinguishing fire in space and buildings while water sprays are more useful in protection...
ction of equipment's.
Fire Alarm Systems Every year, thousands of people die in home and commercial building fires, but far more are saved as a result of fire alarm systems that provide them with sufficient notice to evacuate the premises. In the distant past, fire alarm systems consisted of men and sometimes animals, but more recently, increasingly sophisticated systems have been developed that form an essential part of the concentric layers of building
Fire Suppression Systems Fire results when fuel, oxidant, and sufficient heat combine in time and place (New Zealand Institute of Chemistry, n.d.). The fuel is typically a carbon-based material like paper, wood, oil, or gas, while ambient air typically provides the oxidant in the form of oxygen. Other oxidants include nitrates, chlorates, and peroxides and therefore should never be stored alongside fuel materials. For combustion to occur the heat must sufficient
Other types of systems include carbon dioxide systems. This is ideal for electrical hazard areas; however, it's more expensive than sprinkler systems. Foam extinguishing systems use a foam producing solution. it's effective for combustible liquids; however, again, it is not cost effective for most applications ("Chapter 31"). Determination of Water Amount and How it Can be Provided: The problems encountered regarding the determination of the amount of water required on premises for
The requirements are more specific in terms of the size and placement of the fire extinguishers. These shall be located no further than 75 ft (23 m) from the Class D hazard. In this case, the placement of the fire extinguishers will be determined by the location of the metal fabrication facilities. Assuming that these are located in the center of the room, and that the distance from the center
Fire Safety Management The purpose of this paper is to explore several key concepts related to Fire Safety Management. Specifically this paper aims to explore the following concepts in greater detail: Fire protection/suppression systems, Building Construction and Exit Drill in the Home (EDITH) and other Home Safety Programs. Fire technology has expanded in recent years, providing for important fire safety management components. This includes construction of more fire retardant buildings and implementation
Security at workplaces is not only the responsibility of the management, but all the parties in the premises. Therefore, it is important that everyone is involved one way or another in maintenance of security. In a company the size of Walter Widget, with 240 personnel, it can be challenging to maintain high security standards. With the increasing nationwide crime against workplaces and businesses, the stakes in workplace security are high. Walter
Our semester plans gives you unlimited, unrestricted access to our entire library of resources —writing tools, guides, example essays, tutorials, class notes, and more.
Get Started Now